Set of 4 Ford Surround Inner Door Handle Black XA – B - Black

This item will incur addition bulky freight costs upon purchase.

The enemy of any classic car and it's only when you strip back carpets, trims and mouldings do you uncover just how prevalent rust is. Save yourself both time and hassle and fit new steel replacement panels.

Bracket spare wheel which suits the 36 Gallon tank optioned vehicle.

(3 piece), bracket which attaches the spare wheel to the boot floor to hold the spare wheel down in the vehicle.

Please note: The bracket will need to be attached to the floor panel.

This product suits Ford XW, XY

• Falcon GT
• Sedan
• Fitted with 8 cylinder V8 351 (5.8 L) engine.

Floor Pan XD XE XF Will Fit XR - XC LHR- RP189

This item will incur addition bulky freight costs upon purchase.

The enemy of any classic car and it's only when you strip back carpets, trims and mouldings do you uncover just how prevalent rust is. Save yourself both time and hassle and fit new steel replacement panels.

Seat Bolt Kit – Includes 8 Bolts and 8 Retaining Speed Clips Suits Bench or Bucket Seat

To suit

• New Splined / Ribbed Door Panel Lock Pull Knobs
• Chrome Plated Plastic
• Dimensions:
  • (The part that slides through the ferrule on the door panel)
  • (The opening which the lock shaft threads to)
• Length:  apx. 1-7/8 "
• Base Outside Diameter:  apx. 5/16" 
• Base Inside Diameter:  apx. 3/16" 
• Pull Knob Diameter: 11/16"

• 1 Pair
• GM used various colored & styled lock knobs over the years.  This style is typical of the late 1960's and early 1970's and is referred to as the ribbed or splined lock knobs due to the vertical groves.  Both Die-Cast metal & plastic ones were used and are available.  Later model years used a smooth shaft however, for the most part they are all interchangeable.
• Please Note:  The splined lock knobs have thicker shafts and have larger diameter heads as compared to the smooth style knobs. 
• Fits (but is not limited to) the following GM Models:
  • CHEVROLET:      
    
    • 1968  -  1969  Camaro
    • 1968  -  1972  Chevelle  /  Malibu
    • 1968  -  1972  El Camino (71-72 GMC Sprint)
    • 1970  -  1972  Monte Carlo
    • 1968  -  1972  Chevy II  /  Nova
    • 1968  -  1970  Biscayne  /  Bel Air  /  Impala  /  Caprice
  • PONTIAC:
    
    • 1968  -  1969  Firebird
    • 1968  -  1972  Tempest  /  LeMans  /  GTO
    • 1971  -  1972  Ventura
  • BUICK:
    
    • 1968  -  1972  Special  /  Skylark  /  GS
  • OLDSMOBILE:
    • 1968  -  1972  F85  /  Cutlass  /  S  / 442

The perfect finishing touch for new Pony door panels, we make these components ourselves at Scott Drake to assure you of a perfect fit and color match for your customers. Ours are double dipped in textured vinyl just like originals.

Reproduction of the original door panel cup insert that fits into the bottom of the door panel cups for Mustangs with a Pony or Deluxe interior. Cup inserts are sold individually. 2 required per vehicle (drivers and passenger door). Available in white. For use on 1965-66 Mustangs with Pony interior and 1967 Models with Deluxe interiors.

Does it fit my vehicle?

Call or email any enquiries. Left and right available. $800 each side. $1600 total. 

Priced to clear. 

Postage to be calculated on top of price. 

$45 per seal - $80 for 2

Ford XR-XT-XW-XY Falson & ZA- ZD Fairlane Rear Quarter Glass Seal 

New Reproduction Front Bumper for a Holden Torana LC LJ

Please email or call for a quote on freight for this item as it is a bulky item.

This item will incur a quote for a frieght cost as it is a bulky item.

XW Ford Front Bumper Bar

This item will incur addition bulky freight costs upon purchase.

The enemy of any classic car and it's only when you strip back carpets, trims and mouldings do you uncover just how prevalent rust is. Save yourself both time and hassle and fit new steel replacement panels.

1968 Mustang; Quarter Panel Reflector Assembly; w/o Markings; with Chrome Bezel

Reproduction of the late style reflector for use with 1968 Mustangs built after 2/15/68. This reflector is surface mounted onto the rear quarter panel and comes complete with a bright chrome plated trim bezel. Reflector will fit both RH or LH sides. Sold individually. 2 required per vehicle.

Includes reflector, chrome bezel, body seal, and mounting hardware. This reproduction does not feature the FoMoCo script marking.

Ford Applications

• 1968-1968 Ford Mustang Base
• 1968-1968 Ford Mustang Shelby GT-350
• 1968-1968 Ford Mustang Shelby GT-500
• 1968-1968 Ford Mustang Shelby GT-500KR

Branda performance 1965 Ford gt 350 logo

Floor Pan XD XE XF Will Fit XR - XC LHR- RP189

This item will incur addition bulky freight costs upon purchase.

The enemy of any classic car and it's only when you strip back carpets, trims and mouldings do you uncover just how prevalent rust is. Save yourself both time and hassle and fit new steel replacement panels.

Features:

• Improved stampings are stronger and stiffer
• Polished aluminum
  

c5zz-6513208D 

1968-73 Ford / Mercury Coat Hook Cover - Black

Reproduction of the original coat hook cover designed for use on various Ford and Mercury models. The coat hook cover is manufactured as original using a rubber compound with a black finish. Use with part number 29232A coat hook base (sold separately).

Sold individually. Use as required.

• 1968-1973 Ford Mustang
• 1968-1973 Ford Bronco
• 1968-1973 Ford Truck (F100/F250/F350)
• 1968-1973 Ford Galaxie
• 1968-1973 Ford Torino
• 1968-1973 Ford Maverick
• 1968-1973 Ford Ranchero
• 1968-1973 Ford Thunderbird

• 1968-1970 Mercury Comet
• 1968-1970 Mercury Cougar
• 1968-1970 Mercury Monterey

Reproduction of the original bumper guard inserts for 1967-69 Camaro models with the optional deluxe front bumper guards, or 1967-68 Camaro models with deluxe rear bumper guards. This rubber insert installs directly into the bumper guard slot and features studs for installation. Replaces the old or worn out original perfectly. Sold individually. Note: Refer to part number # 3938611 for 1969 Camaro rear bumper guard cushion.

Applications:

• 1967-1969 Chevrolet Camaro (front)
• 1967-1968 Chevrolet Camaro (rear)

Headlight Sealed Beam 7" Round HI Beam / Low Beam With Park Light Opening